Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Do with need a sound pressure level meter with a 'ball'?

Status
Not open for further replies.

onemilimeter

Electrical
Joined
Jul 25, 2009
Messages
54
Location
GB
When using sound pressure level meter, does it really matter to use it with the 'ball' or without the 'ball' as shown in figure below.

Thank you very much

splm_ball.jpg
 
The ball, presumably, helps with screening from wind, so if you have no wind...

TTFN

FAQ731-376
 
Oh I see... In my experimental, there is a blower around. So, I need the ball... Thanks.
 
The technical term is "wind screen". It reduces the sound created by air flow across the microphone. A wind screen amy also cause some attenuation to high frequency sound. It has limitations, so it is still very important to measure background sound before measuring the sound of interest. As a practical matter, I leave the wind screen on, even indoors, for bump protection for most measurements.
 
When you are measuring outdoors particularly or in say near fan exhausts, this is ,mandatory. Even standards specify the wind velocity at noise measurements should not exceed 7m/s (? ISO 3744).

Jeyaselvan
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top