DMU problem 1

[Slaen]

I have a part I open in V5 and the tree opens fine but im getting no picture.. I tried to do a fit all in and nothing in the tree is hidden? Any ideas?

 

[solid7]

Are the links broken? (are the little gears in the tree cracked, and/or colored gray?)

---
CAD design engineering services - Catia V4, Catia V5, and CAD Translation. Catia V5 resources - CATBlog.

 

[Slaen]

No all the links are fine.. nothing is broken, hidden or missing.

 

[solid7]

I don't know the specifics of your case, but sometimes when you import files from a neutral format, the geometry comes in all black, or some other color. The only thing that I can think of, is that you can do a zoom "fit all in", and try dragging a window around your geometry.

Is this a part, product, or other? Is it native data or neutral? What version of Catia?

---
CAD design engineering services - Catia V4, Catia V5, and CAD Translation. Catia V5 resources - CATBlog.

 

[itsmyjob]

Open the tree and right clic, 'reframe on' some element...

Also check if Filters are in use...( Tools / Visualization filters...

Eric N.
indocti discant et ament meminisse periti ​

 

[Slaen]

Ok I fixed it.. I went in my C drive and followed the path to the cat settings folder and renamed it to catsettings.old and that fixed it

 

[catiajim]

Next time it happens, try going to VIEW, GEOMETRY. Make sure it is checked.

This stupid setting can actually turn your geometry window OFF. Confuses the @#$% out of people.