Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Displaying Viscosity vs. Temp

Status
Not open for further replies.
DanStro

DanStro

Mechanical
Joined
Dec 11, 2004
Messages
396
Location
US
I am running a simulation of a viscoelastic material with TRS behavior in Abaqus standard. I am starting to think that the calculated viscosity vs. temperature is not correct so I want to check it at some (any) interval. Does anyone know if there is an 'easy' way to have Abaqus output the viscosity, at a single node is OK?

I know that I can do this using a UTRS, or something similar, but I am hoping that I am missing an easier way.

Thanks,
Dan
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
SPH Fluid Damping — How to Set Artificial Viscosity and Bulk Coefficients for Water vs PDMS in Abaqus/Explicit?
Replies
2
Views
3K
stevekoja
S
S
  • Locked
  • Question Question
How to Properly Implement Viscosity in SPH Using ABAQUS Explicit Analysis?
Replies
1
Views
2K
FEA way
FEA way
N
  • Locked
  • Question Question
Force vs displ
Replies
17
Views
3K
FEA way
FEA way
Saks1235
  • Locked
  • Question Question
ABAQUS:- Problem with Concentrated AM model Vs Goldak AM model
Replies
5
Views
2K
FEA way
FEA way
spyros_ar
  • Locked
  • Question Question
Solid elements vs Continuum shell elements for modelling a core in a sandwich structure
Replies
10
Views
5K
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top