melbourneuni
Mechanical
Dear all,
Does any one know that how we can fix the displacement (0.5) at one cross section.
Does any one know that how we can fix the displacement (0.5) at one cross section.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Displacement 1
- Thread starter melbourneuni
- Start date
- Status
-
1
- #3
A fixed displacement at a set of NODES through a cross section is straightforward, simply use the *BOUNDARY, TYPE=DISPLACMENT and specify your displacement i.e.
*BOUNDARY, TYPE=DISPLACMENT
<node number or set>, DOF(1st), DOF(last), 0.5
Seasons greetings,
-- drej --
*BOUNDARY, TYPE=DISPLACMENT
<node number or set>, DOF(1st), DOF(last), 0.5
Seasons greetings,
-- drej --
- Thread starter
- #4
melbourneuni
Mechanical
Dear Drej,
I run my model by version 6.4.
would you please let me know more.
saeed
I run my model by version 6.4.
would you please let me know more.
saeed
- Status
Similar threads
- Locked
- Question