Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Discontinuity of nodes CAESAR II

Status
Not open for further replies.

Mohamed Othman

Mechanical
May 11, 2017
2
I have a nodes discontinuity problem in CAESAR II, Can you help me? How to correct it?
 
Replies continue below

Recommended for you

Your pipes must be connected.

Technology is stealing American jobs. Stop visas for robots.
 
Get someone who knows what they are doing.
 
I sometimes get this problem. When checking it comes out to be the isometrics which are not accurately drawn and have wrong dimensions.
So you need to verify if the isometric drawings which you are trying to model are correct. Check thoroughly with isometrics and adjust where you find the mistake.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor