Mar 23, 2007 #1 apruccoli Electrical Joined Mar 23, 2007 Messages 4 Location US I have a Direct Logic 105 f1-130da and i want to test it to see if its good is there a way to wire it up to test it i have the software and cable
I have a Direct Logic 105 f1-130da and i want to test it to see if its good is there a way to wire it up to test it i have the software and cable
Mar 23, 2007 #2 GerryMoore Electrical Joined Apr 28, 2006 Messages 22 Location US Yes, go to http://www.automationdirect.com and download the manual for it. Make a 120V cord up and plug it in. Hook up a 24V switch for an input and a 120V light for an output, and have at it. Upvote 0 Downvote
Yes, go to http://www.automationdirect.com and download the manual for it. Make a 120V cord up and plug it in. Hook up a 24V switch for an input and a 120V light for an output, and have at it.