Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DIN H2

Status
Not open for further replies.
sawhney

sawhney

Mechanical
Joined
Feb 11, 2003
Messages
10
Location
IN
I have been recommended for DIN H2 wide standard no 1.0425 for the fabrication of chimmney having temp around 350debg cent.Can anybody recommenmd me the welding electrode for the same.CAn anybody let me know what are the equal standards for the Indian or American community.

Regards
 
Sort by date Sort by votes
Material 1.0425 is named DIN 17155 HII
ASTM similar materials are A414 Gr. E and A516 Gr. 65
Depending on thickness and requirements regular low carbon steel electrodes should be adequate.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

sta67
  • Locked
  • Question Question
DIN steel casting test coupon
Replies
5
Views
2K
ShataCastings
ShataCastings
tarekzad
  • Locked
  • Question Question
???-170 equivalence according to DIN or ASTM Code
Replies
0
Views
258
tarekzad
tarekzad
metboss
  • Locked
  • Question Question
Material selection for H2S and CO2 application
Replies
5
Views
873
metboss
metboss
barboric
  • Locked
  • Question Question
DIN C22 steel- problems with hardening
Replies
1
Views
178
bobjustbob
bobjustbob
PressEquip
  • Locked
  • Question Question
H2S, Material Requirements for Wet H2S Service, Phosphorous
Replies
2
Views
305
Metalero
Metalero

Part and Inventory Search

Sponsor

Back
Top