I'm working in refurbishing an old machine, it was built in Europe and I only have hardcopy of the parts design, I'm struggling figuring out sizes and types of holes, so far I need the DIN 74 standard to start ordering new tooling, I appreciate if somebody can point me where can I download it, thanks, greetings from Mexico
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
DIN 74 Standard
- Thread starter 130873
- Start date
I assume you have tried search engine searches without luck. Not likely you'll find it as a free download.
Some libraries may carry it, and most libraries can get it for a nominal fee through inter-library loan, though this often takes weeks.
It can be purchased from the following suppliers:
ANSI eStandards Store:
Global Engineering Documents:
Some libraries may carry it, and most libraries can get it for a nominal fee through inter-library loan, though this often takes weeks.
It can be purchased from the following suppliers:
ANSI eStandards Store:
Global Engineering Documents:
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Solved
- Locked
- Question