Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DIN 2505/AD2000 Merkblatt B7/B8

Status
Not open for further replies.
Tomster88

Tomster88

Mechanical
Joined
Sep 20, 2004
Messages
5
Location
NL
Thnx everybody! This was very helpfull, But does somebody also have a calculatonsheet or something simular according to the DIN 2505 or/and AD 2000 Merkblatt B7-B8? this would help me very much! As you can notice my experience in Flange-calculation is almost northing because it is not my area.
Hope you can help me!

Thanks,

Tom
 
Status
Not open for further replies.

Similar threads

FPPE
  • Locked
  • Question Question
SA-193 B8 CL2 bolts torque for B16.5 Ring Joint #2500 and #600 application
Replies
7
Views
2K
GD2
GD2
Awais Arshad
  • Locked
  • Question Question
Effect of Tubesheet Induced Loadings on Flange Design in AD Merkblatter B8
Replies
0
Views
136
Awais Arshad
Awais Arshad
Italo01
  • Locked
  • Question Question
Welding of A193 B7 Steel
Replies
6
Views
644
DekDee
DekDee
Awais Arshad
  • Locked
  • Question Question
ASME VIII-2 & AD Merkblatt : Choice of Code for Heat Exchanger Ordering
Replies
2
Views
362
XL83NL
XL83NL
1945SA
  • Locked
  • Question Question
AD 2000 MERKBLATT
Replies
6
Views
2K
1945SA
1945SA

Part and Inventory Search

Sponsor

Back
Top