Dimention Colors 2

[joec230]

When I add a dimention to a drawning, that wasn't used to create the part it turn out to be grey. It is also grey when I print it. How can I set it to be black like other dimentions? I did figure out how to get rid of the parentheses, butthat was easy. I have looked every where for this option with no luck, and I'm sure it's probably in front of me.

Joe Conklin
joeconklin@gmail.com

 

[aamoroso]

Print Black and White, not Color is the easiest solution.

or

Tools - Options - Colors - Imported Annotations (Driven) and change color. I advise against this option, this is the way you can identify Driven Dimensions, if you change it you will be unable to tell by glancing at the drawing or model.

I am away from my SW computer right now, but I will look into other alternatives.

 

[SBaugh]

Line Format Toolbar and select Line Color.

Regards,

Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376
faq559-716 - SW Fora Users

 

[aamoroso]

Nice one Scott, I was unaware that was an option for changing Dimension Color on a drawing. I will have to stick that one in my tips sheet for our users.