Rick7571
Electrical
- Mar 1, 2007
- 9
How can I set up my SE (version 18) so, the dimensions are shown in fractions (1/4, 1/2, 1/8 and on) instead of decimals (.25, .5, .125 and on)?
Thanks for the feedback
Thanks for the feedback
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
dimensions in fractions
- Thread starter Rick7571
- Start date
- Status
Tools>Options>Dimension Styles
Format>Styles....Change drop down to Dimensions. Add a "New" style call it Fraction (under Name tab). Under Units tab change the round-off to a fractional value. change whatever other options you need.
Once you have that new dim style, you can change all current dims to fractions, or click on one dim and change them individually.
I'm sure if you want that to be your default for the template, you can.
Solidworks 2005
Solid Edge V17
Format>Styles....Change drop down to Dimensions. Add a "New" style call it Fraction (under Name tab). Under Units tab change the round-off to a fractional value. change whatever other options you need.
Once you have that new dim style, you can change all current dims to fractions, or click on one dim and change them individually.
I'm sure if you want that to be your default for the template, you can.
Solidworks 2005
Solid Edge V17
- Status
Similar threads