Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
dimension line anchor points
- Thread starter rschmick
- Start date
- Thread starter
- #3
beachcomber
Mechanical
That's how it works.
Hold down the alt key then left mouse and drag the handle onto the new element.
If you simply want to adjust the length left mouse then drag to new length.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
Hold down the alt key then left mouse and drag the handle onto the new element.
If you simply want to adjust the length left mouse then drag to new length.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
- Thread starter
- #5
beachcomber
Mechanical
I don't think you can, unless you create a quick sheet and show the view names.
The problem is that what you call a 'Front' view might not have been modelled on the 'Front' plane.
(In Catia V5 the 'Front' view is always the first one placed, irrespective of what direction the view is from.)
To add them after placing just select the view, enter the 'Caption' and then click the 'Show Caption' button.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
The problem is that what you call a 'Front' view might not have been modelled on the 'Front' plane.
(In Catia V5 the 'Front' view is always the first one placed, irrespective of what direction the view is from.)
To add them after placing just select the view, enter the 'Caption' and then click the 'Show Caption' button.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
- Status
Similar threads