Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Digital Buck Data 4
- Thread starter CAD2015
- Start date
-
1
- #2
-
1
- #3
@CAD2015
Read the response from TDIMeister on
thread71-223909
Drew Mumaw
Read the response from TDIMeister on
thread71-223909
Drew Mumaw
- Thread starter
- #4
-
1
- #5
i liked TDIMeister response and at our shop we are doing something similar. we have a digital buck data for all our composite parts because loading an assembly with composite parts takes a lot of time. all the files like 100mb and up with a lot of unneeded data for assemblies. i'm into aerospace.
-
1
- #6
Hi CAD2015!
Digital buck means the jt visualisation data that is used only for viewing,clash checking,clearance analysis.It is used in the Application called Teamcenter vismock up a product of SIEMENS.The CAD data from the teamcenter is converted to the jt format which is called as "digibuck" and the same is opened in vis mock up application for the purposes mentioned here.Hope it helps.
Digital buck means the jt visualisation data that is used only for viewing,clash checking,clearance analysis.It is used in the Application called Teamcenter vismock up a product of SIEMENS.The CAD data from the teamcenter is converted to the jt format which is called as "digibuck" and the same is opened in vis mock up application for the purposes mentioned here.Hope it helps.
- Status
