Different solid (look) in "Explosion" and "No Explosion"... 1

[amirkhattab]

Hello

I've made 'Replace Component' and everything is well in 'Modeling' (correct name/number and solid)... but in 'Modeling-Specification' i've wrong 'Explosion View' - with old part (before Replace Component).
The main assemblie (whole bed) were made as 'Save As'...

Screens:

http://s29.postimg.org/5lj901v5j/Modeling.png

http://s8.postimg.org/i7dqjpd8l/Specification.png

Thank You in advance

 

[cowski]

It appears that the cross-bar has moved. Are you using the correct arrangment and/or reference set for the leg assembly?

www.nxjournaling.com

 

[amirkhattab]

Mr cowski >>> I dont know how... but its true: cross-bar has moved... 'Unexplode Component' is good solution.

Thank You very much
I greet YOU