different scale factor

[simo]

hi people,

is it possible to scale a model with different scale factor for the 3 direction (x, y, z)? For example to impose 0.5 for x, 0.2 for y and 0.8 for z.



Thank you

Simo

 

[eServ]

I don't think that is possible, but I'm sure you could probably write some relations to get what you want.

 

[kvision]

You can do it with Pro/ Moldesign, shrinkage

setup>shrinkage>By Scaling, pick a csys and it let you pick scale factors in each direction.