Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

difference in results of the post1 and post26 preprocessor for the same problem

Status
Not open for further replies.
harishkalyan

harishkalyan

Structural
Joined
Jul 18, 2012
Messages
3
Location
DE
Hello..
I am modelling a soild 185 element with 4 shell lay ups under a simple tension test along the X-direction.
The results of the stresses I obtain in the X direction from the post1 and post26 post processors are different. Can somebody clarify the reason this is so??
Thanks
 
Sort by date Sort by votes
sorry for the mistake in the title....its post1 and post26 post processors not pre processors....
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
V
  • Locked
  • Question Question
Boundary conditions and post processing for Planar tension test
Replies
0
Views
602
vsw
V
andradesilva
  • Locked
  • Question Question
How to export to a text file results of analysis with material non-linearities, for all the substeps
Replies
0
Views
440
andradesilva
andradesilva

Part and Inventory Search

Sponsor

Back
Top