Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Die Grinder Formulas

Status
Not open for further replies.
richg1

richg1

Mechanical
Joined
Sep 25, 2002
Messages
77
Location
AU
Does anyone know of formulas for cutting metal with a die grinder and Aluminium Oxide type discs.

I have found plenty on grinding applications but nothing relating to cutting to a specified depth with a die grinder. Was hoping to get resultant torque, side loads, rpm etc...

Cheers,

Rich
 
Status
Not open for further replies.

Similar threads

GVMOGUL
  • Locked
  • Question Question
Cycle Counter Attached To Metal Forming Die
Replies
2
Views
378
ajack1
ajack1
tgwms
  • Locked
  • Question Question
standard sheet impression dies?
Replies
1
Views
215
MikeHalloran
MikeHalloran
pardal
  • Locked
  • Question Question
spring cuting die gap
Replies
0
Views
84
pardal
pardal
JimRa
  • Locked
  • Question Question
metal removal formulas
Replies
2
Views
111
jjv32
jjv32
buzzp
  • Locked
  • Question Question
Diesel Fuel Heater
Replies
2
Views
196
buzzp
buzzp

Part and Inventory Search

Sponsor

Back
Top