Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
metal removal formulas
- Thread starter JimRa
- Start date
hi,
the best thing i can recommend to you is too investigate the Machinery's hankbook this contains general guides to cutting speeds and feeds isbn no#0-8311-1155-0 for most metal forming/machining proceesses if you have an oddball material to machine refer back to the tool manufacturer.
the best thing i can recommend to you is too investigate the Machinery's hankbook this contains general guides to cutting speeds and feeds isbn no#0-8311-1155-0 for most metal forming/machining proceesses if you have an oddball material to machine refer back to the tool manufacturer.
Go to they have some software that will do the trick .It is called TEC it will give you feeds and speeds .
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question