Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Die Design 1
- Thread starter lambo25
- Start date
-
1
- #2
Hola:
The Die Engieeniering of NX it´s a good modul to design die draw for the automobil, specially the chassis o parts of car body.
Is a powerfool and consistent tool to design transfers die and if besides you work with DIE DESIGN you are on the perfect way to the exit.
If you work for automobil and you make parts of carbody is perfect, if you create pieces for another industry and it isn´t parts a carbody you can work with DIE PROGESSIVE.
VAlencia----------Spain
(Europa)
The Die Engieeniering of NX it´s a good modul to design die draw for the automobil, specially the chassis o parts of car body.
Is a powerfool and consistent tool to design transfers die and if besides you work with DIE DESIGN you are on the perfect way to the exit.
If you work for automobil and you make parts of carbody is perfect, if you create pieces for another industry and it isn´t parts a carbody you can work with DIE PROGESSIVE.
VAlencia----------Spain
(Europa)
- Status
Similar threads
- Locked
- Question
