Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Development of welded wire
- Thread starter par060
- Start date
dirtsqueezer
Geotechnical
What are you using the plain wire for?
I know for reinforced concrete, lap length for welded wire is usually defined in terms of grid spacing, I believe at least two 'sections'. This might just be more than the specific development length for individual wire because the number is truncated.
WW fabric is never installed right anyway. Just use #3 bar!
I know for reinforced concrete, lap length for welded wire is usually defined in terms of grid spacing, I believe at least two 'sections'. This might just be more than the specific development length for individual wire because the number is truncated.
WW fabric is never installed right anyway. Just use #3 bar!
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question