Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Determining the total number of a certain diameter

Status
Not open for further replies.

laurajt

Electrical
Joined
May 30, 2002
Messages
2
Location
US
Does anyone know a way to determine the total number of specific diameter holes in a part or assembly?

For instance, I have a part with 6 different diameter holes. I would like to be able to determine the total number of .250 diamter holes, the total of the .281 dia. holes, etc. (and hopefully be able to pass this parameter to a drawing)

Thanks in Advance!!

Laura
 
Laura,

How about using nested logic statements? With only six diameters, this might not be to tough. Another option might be to use the Excel to do the sorting and counting with the Excel Analysis feature in BMX.

If you have a preference but are having trouble with the set up, post back and I can help out more.

Best regards,

Matthew Ian Loew
"Luck is the residue of design."
Branch Rickey


Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top