Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Details About API Standards

Status
Not open for further replies.

lsrisurya

Mechanical
Joined
May 6, 2013
Messages
11
Location
IN
Hi to all,


Actually am from Power background so am very familar with ASME then API,After coming to oil and gas iam daily listening this API


I wanted to know the neccessity of API Standards when ASME standards are there?

SO Anybody can guide me

camparing with ASME,ASTM AND ANSI ?How the Dimension and Materials change as per API?


Thanks in Advance....
 
The API standards do not replace ASME, ASTM, or ANSI standards, so I am not sure what you are asking.

The API standards apply to mateials, products, and processes used in the Oil and Gas industry. There are a lot of them. They cover situations not covered by ASME, ASTM, or ANSI standards.

Why do we have local ordinances when we have state and federal laws?

rp
 
When qualifying a WPS/PQR in accordance with API 1104 can you grind on the root pass if it exceeds the 1/16" max allowed for root reinforcement?
 
As for as my knowledge it is one of the material specification released by API.
all the trims are having equivalent ASTM material specifications.
If you are looking for valves the attached document may be useful to you

regards
Kulasera
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top