Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Detachment

Status
Not open for further replies.
Zerbo

Zerbo

Civil/Environmental
Joined
Feb 2, 2005
Messages
3
Location
IT
Is possible modeling the detachment, after a crisis value, between two different materials?
If it is, what is the procedure to do?

Is all the week wich I try, but nothing!

Thank all!

Zerbo

P.S. sorry for my english!
 
Sort by date Sort by votes

If you want so simulate a crack propagation or material debonding then , the following chapter might be of interest :

ABAQUS Analysis User's Manual

7.9.3 Crack propagation analysis

 
Upvote 0 Downvote
Thanks a lot for the moment!
 
Upvote 0 Downvote
I've another question, is possible modeling the material debonding in a 3D model?

For the moment I use elastics material with stress failure, and the two material are connected with a tie constraint, but the results are too far from the real comportament.

Anyone have a solution for resolve my problem?

For example is possible use another constraint type for modeling the debonding?

Thanks

Zerbo
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top