I have to design a propane-propylene splitter. What is a typical feed temperature and pressure? The feed mixture is 30% propane and 70% propylene. The ovhd product purity is 99.9% and the Bottoms product purity is 99%. Where can I get equilibrium data to create the McCabe-Thiele Diagram?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
designing a propane-propylene splitter
- Thread starter Delorise
- Start date
