Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

design wind speed for Albany New York

Status
Not open for further replies.

apang

Structural
Jun 17, 2003
2
Can someone tell me id Albany, NY qualifies as a Special Wind Region according to ASCE 7-02 map. If so, what is the design basic wind speed that is used for the City? Thanks!
 
Replies continue below

Recommended for you

I would consult one of the following:

1. Consult one of the local structural engineers. I found out that many fellow engineers, in situations like this, would give professional courtesy to another fellow engineer (I do this once and a while). Pull their names from the internet (yellow page adds).

2. Call the local building officials. They are of tremendous help especially if they are the AHJ who will grant the building permit.

3. A local engineer who is a member of this forum may reply as well.

Good luck.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor