Can anyone help me with this eagle point question. After making a ground profile from an existing conditions surface model, I then draw a design profile in the profile graphic. My problem is in taking this design profile and turning it into a 3D polyline in the plan view so I can make a new TIN, or surface model, to merge with the existing surface model and draw contour lines.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
DESIGN PROFILE TO PLAN VIEW GRAPHICS IN EAGLE POINT
- Thread starter 01MIKE
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
