Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DESIGN PROFILE TO PLAN VIEW GRAPHICS IN EAGLE POINT

Thread starter 01MIKE
Start date Dec 23, 2006

Status: Not open for further replies.

Dec 23, 2006

01MIKE

Civil/Environmental

Can anyone help me with this eagle point question. After making a ground profile from an existing conditions surface model, I then draw a design profile in the profile graphic. My problem is in taking this design profile and turning it into a 3D polyline in the plan view so I can make a new TIN, or surface model, to merge with the existing surface model and draw contour lines.