Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design of a Transmission System for a Turboshaft Engine

Status
Not open for further replies.
JohnKonnakkottu

JohnKonnakkottu

Aerospace
Joined
Apr 30, 2016
Messages
1
Location
GB
Hi everyone,

I am looking to learn a bit about the design of a transmission system for a twin engine helicopter (from the perspective of an engine designer), and was looking to see if anyone had any recommendations for books or design manuals.

Regards,
John
 
Status
Not open for further replies.

Similar threads

V
  • Question Question
Designing a Checking Jig for Sheet Metal Hole Positions After Bending
Replies
0
Views
7K
vutuankhanh
V
S
  • Question Question
Need feedback on my jig design for welding aluminum sheet metal – flatness + dimensional control is key
Replies
10
Views
13K
gtaw
gtaw
T
  • Locked
  • Question Question
Why use a buildbotics controller
Replies
0
Views
1K
thomas29
T
dogbural
  • Locked
  • Question Question
machining a long tube (380mm)
Replies
8
Views
4K
Gr8blu
Gr8blu
Jack_the_JOAT
  • Locked
  • Question Question
Designing a quadcopter powertrain.
Replies
1
Views
771
btrueblood
btrueblood

Part and Inventory Search

Sponsor

Back
Top