Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design Loads for Saipan, N. Mariana Islands

Status
Not open for further replies.

Kjogle

Structural
Joined
Feb 4, 2003
Messages
7
Location
US
Hi All,

I am designing an outdoor lumber rack in Saipan, Northern Mariana Islands and need to find some information about building codes, wind speeds and seismic data. Anybody have any information? Thanks.

KJOGLE
 
KJOGLE,

See UBC 1997, Appendix Chapter 16 has seismic data for the Mariana Islands. After the Guam E/Q of August 1993, Guam changed from seismic zone 3 to 4. Saipan (CNMI) may have changed too.

Basic wind is 155 mph - and typhoons are frequent!

HTH

 
I recommend that you get a hold of the MIL-HBK 1002 titled structural loads. It contains many valuable and hard to find data for remote islands where the US has bases. Let me know you e-mail address and I will send you a link to the site.

Good luck
 
Lutfi

My email address is Kjogle@aol.com. Thanks.
 
Check your e-mail. I just sent you the link.

Good luck
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top