Sep 13, 2006 #1 m15 Mechanical Joined Jun 29, 2006 Messages 10 Location IN In general what are the design elements that we need to look after in pump(centrifugal) that will reduce the "audible noise", as well as "pumping / water noise.
In general what are the design elements that we need to look after in pump(centrifugal) that will reduce the "audible noise", as well as "pumping / water noise.
Sep 14, 2006 #2 BigInch Petroleum Joined Jun 21, 2006 Messages 15,161 Location GB Low speed, low velocity and good bearings. Going the Big Inch! http://virtualpipeline.spaces.msn.com Upvote 0 Downvote
Sep 14, 2006 #3 A Artisi Mechanical Joined Jun 11, 2003 Messages 6,581 Location AU Plus high efficiency at the operating point. Naresuan University Phitsanulok Thailand Upvote 0 Downvote
Sep 15, 2006 #4 zeusfaber Military Joined May 26, 2003 Messages 2,466 Location GB ..... and ability to restore accurate alignment and balance after you've had to replace things like seals. A. Upvote 0 Downvote
..... and ability to restore accurate alignment and balance after you've had to replace things like seals. A.