Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design concept for the gears.

Status
Not open for further replies.

yshgao

Automotive
Joined
Aug 6, 2009
Messages
16
Hi All,

if we design the motion device no matter gear to gear, or ball to plate, the surface hardness on one part should be harder than another one. Please tell why?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top