Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design Burst Calculation for Polypropylene Injection Molded vessel

Status
Not open for further replies.
mmelaney

mmelaney

Mechanical
Joined
Jul 25, 2005
Messages
2
Location
US
I have an injection molded pressure vessel (Cartridge Filter) and I need to find a design burst calculation for the vessel wall to determine maximum pressure rating and safety factor. Has anyone ever found a specification or ASTm document relating to this condition?

Thanks
Mike
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
Pipe wall thickness calculation method for t≥D/6 or for P/SE>0.385
Replies
5
Views
14K
goutam_freelance
goutam_freelance
IanVG
  • Locked
  • Question Question
Calculation or Design Guidelines for Proper Sizing of Flexible Floating Ball Extractor
Replies
2
Views
1K
LittleInch
LittleInch
K
  • Question Question
Nozzle load calculation
Replies
2
Views
559
KevinNZ
KevinNZ
Vishakash
  • Locked
  • Question Question
Polypropylene piping support design stress consideration
Replies
6
Views
585
LittleInch
LittleInch
R
  • Locked
  • Question Question
Air assisted seal pressure vessel
Replies
3
Views
4K
btrueblood
btrueblood

Part and Inventory Search

Sponsor

Back
Top