Design Bracket

[anandrp]

Please give a solution for the design of bracket
need to find the group structure of fasteners...
assuming all data in mm and Newton.,

Note- materail Stainless steel....
Assume thickness....(may be 5-10mm)

 

[slickdeals]

This a basic problem. Either hire a structural engineer or look in some basic statics book. All you need to do is to resolve the moment into a set of T/C forces.

Don't expect anyone to do your work for you.

 

[desertfox]

Hi anandrp

Have a look at this site:-

http://www.roymech.co.uk/Useful_Tables/Screws/Bolted_Joint.html

desertfox

 

[boo1]

Your design is not trival, and many details are missing.

Condsider getting a mentor to help guide you and check your design.

 

[anandrp]

Thanks all

I know this is very basic
But It was an emergency So was not having any data to find the formulae so just put ...

once again thanks all

 

[hokie66]

Emergency...never having time to do it right the first time leads to the second time.