D
design-engine
Guest
Whats the new bad boy laptop out from Dell now days? Anyone use the http://www.alienware.com/ machines for running Pro/ENGINEER?time to trade in my M90.
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
- Status
- Thread starter
- #2
M
magneplanar
Guest
m6400 should replace your m90, how do you lug that thing around? wouldn't it be easier to have a 15" and hook up to a projector? the two probably weigh no more than your m90 hehe
i don't recommend AW, they are cool, no denying that, but...no workstation graphic cards for them tho, right?
otherwise go with their m17x and the oohs and ahhs from all those lights
and imagine how nice the blu-ray will look on that next flight
Edited by: magneplanar
i don't recommend AW, they are cool, no denying that, but...no workstation graphic cards for them tho, right?
otherwise go with their m17x and the oohs and ahhs from all those lights
and imagine how nice the blu-ray will look on that next flight
Edited by: magneplanar
- Thread starter
- #3
C
c_thompson_68
Guest
Bart,
I currently use a Dell M90 Precision laptop, and previously used an Alienware MJ-12 7700. I believe the Dell Precision M6400 is a replacement for the M90.
I liked the Alienware, but replaced it with Dell for two reasons:
<ul>[*]To replace the motherboard (under warranty), I had to ship the Alienware back for repair and wait two weeks to receive it back. This resulted in a loss of work, and I was not happy. I believe Dell will send a repair technician on-site for major repairs.
[*]SolidWorks does not support the video card drivers for Alienware, even if it is the same video card used in the Dell laptop. I do not know if this is an issue with Pro/Engineer.[/list]
Both offer 17 inch monitors, and I would not consider a 15 inch monitor for CAD.
Regards,
Chris Thompson
Edited by: c_thompson_68
I currently use a Dell M90 Precision laptop, and previously used an Alienware MJ-12 7700. I believe the Dell Precision M6400 is a replacement for the M90.
I liked the Alienware, but replaced it with Dell for two reasons:
<ul>[*]To replace the motherboard (under warranty), I had to ship the Alienware back for repair and wait two weeks to receive it back. This resulted in a loss of work, and I was not happy. I believe Dell will send a repair technician on-site for major repairs.
[*]SolidWorks does not support the video card drivers for Alienware, even if it is the same video card used in the Dell laptop. I do not know if this is an issue with Pro/Engineer.[/list]
Both offer 17 inch monitors, and I would not consider a 15 inch monitor for CAD.
Regards,
Chris Thompson
Edited by: c_thompson_68
- Thread starter
- #4
D
Dynamica
Guest
Bart,
If you are looking for the mac daddy of laptops where money and weight are no object? Dell "covet" M6400. Lots of RAM up 16mb. 1gb graphics, Nvidia or ATI. Intel Quad core processors.
[url]http://www.dell.com/us/en/business/notebooks/workstation-pre cision-m6400-cov/pd.aspx?refid=workstation-precision-m6400-c ov&s=bsd&cs=04[/url]
Desktop enginnering has a number of ratings of HP vs dell vs Alienware. Alienware always scores the lowest in rendering and cpu intense programs. Alienware is a great computer for gaming but not for CAD/Rendering. Alienware is also not included in PTC's certified/supported computers.
CK: http://www.ptc.com/partners/hardware/current/support.htm
One of our laptops is a M6300. an upgrade from our last M90. We have 64bit Pro/e, Solidworks, Hypershot, Rapidform, Zscan and a few other graphics/cpu intense programs running on one machine. It works great. If we had the extra cash we would have gone with the M6400. With lots of extra cash flow, the "Covet" M6400.
I guess the question you need to ask yourself is, what is the ultimate inteded use and preformance needs? Gaming, CAD, Rendering.....
Cheers,
Tim
If you are looking for the mac daddy of laptops where money and weight are no object? Dell "covet" M6400. Lots of RAM up 16mb. 1gb graphics, Nvidia or ATI. Intel Quad core processors.
[url]http://www.dell.com/us/en/business/notebooks/workstation-pre cision-m6400-cov/pd.aspx?refid=workstation-precision-m6400-c ov&s=bsd&cs=04[/url]
Desktop enginnering has a number of ratings of HP vs dell vs Alienware. Alienware always scores the lowest in rendering and cpu intense programs. Alienware is a great computer for gaming but not for CAD/Rendering. Alienware is also not included in PTC's certified/supported computers.
CK: http://www.ptc.com/partners/hardware/current/support.htm
One of our laptops is a M6300. an upgrade from our last M90. We have 64bit Pro/e, Solidworks, Hypershot, Rapidform, Zscan and a few other graphics/cpu intense programs running on one machine. It works great. If we had the extra cash we would have gone with the M6400. With lots of extra cash flow, the "Covet" M6400.
I guess the question you need to ask yourself is, what is the ultimate inteded use and preformance needs? Gaming, CAD, Rendering.....
Cheers,
Tim
- Thread starter
- #5
M
mcgowanp
Guest
I have a Dell M6300 and its wickedly fast and this is the 32 bit one!! I have an M90 thats 64 bit and I have to nail that one to the desk!!!
Plus fella's there's only one real thing that we need to think about, when ever we are in an airport, on a train or in a meeting and we pull out our tools of the trade and look over at the marketing staff with their tiny little 10inch screen laptops sqinting to see the start button. Just know that when you open the lid to your baby, pop on the ray bans and hit the on button, everyone will know that you are NOT in marketing or sales, but are in fact, a professional!!
Big laptops are infact whats makes us different. and lugging your M90/6300/6400 around the place in one hand, and your power supply in the other, well thats just a good work out isn't it !?!?
Paddy
Plus fella's there's only one real thing that we need to think about, when ever we are in an airport, on a train or in a meeting and we pull out our tools of the trade and look over at the marketing staff with their tiny little 10inch screen laptops sqinting to see the start button. Just know that when you open the lid to your baby, pop on the ray bans and hit the on button, everyone will know that you are NOT in marketing or sales, but are in fact, a professional!!
Big laptops are infact whats makes us different. and lugging your M90/6300/6400 around the place in one hand, and your power supply in the other, well thats just a good work out isn't it !?!?
Paddy
- Status
Similar threads
- Locked
- Question