Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Delivery Condition of Steel
- Thread starter haya11
- Start date
bridgebuster
Active member
All steel plates and shapes are formed by rolling. Normalizing is a process to improve the ductility.
EdStainless
Materials
'normalized rolling' is a practice where you control the rolling temp and cooling rate.
The other option is to roll, and then do a furnace normalizing treatment.
Some spec alloy in process heat treatment (such as 'normalized rolling') and some don't.
If they don't prohibit it then it may be OK, but they still have to meet all properties.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
The other option is to roll, and then do a furnace normalizing treatment.
Some spec alloy in process heat treatment (such as 'normalized rolling') and some don't.
If they don't prohibit it then it may be OK, but they still have to meet all properties.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
- Status
Similar threads
- Locked
- Question
- Question
