Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Deifne a Report -> "Exception Thrown"

Status
Not open for further replies.
sloth4z

sloth4z

Mechanical
Joined
Aug 12, 2003
Messages
132
Location
US
I can't seem to define a report since I installed 2008. When I try to make one, I get an error that state "Exception Thrown". Anyone have a fix for this?
 
Sort by date Sort by votes
i have the same problem, i tryed with Office 2007 and Office 2003 and both return me the same error.
 
Upvote 0 Downvote
Try to create the report as html instead of .doc and see if it works.
 
Upvote 0 Downvote
yeah... in .html it works good, but .doc format will be better to post process :S
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

oharag11
  • Locked
  • Question Question
Error - Please enter a value greater than 0 - Thermal Joint?
Replies
0
Views
991
oharag11
oharag11
cobra46
  • Locked
  • Question Question
how to include damping in a shock study
Replies
5
Views
1K
statist1
statist1
cobra46
  • Locked
  • Question Question
Linear Dynamic Analysis (Response Spectrum Analysis)
Replies
0
Views
1K
cobra46
cobra46
IdanPV
  • Locked
  • Question Question
Apply Moments in Solidworks Simulation
Replies
2
Views
2K
IdanPV
IdanPV
oharag11
  • Locked
  • Question Question
Rigid Connector proper application
Replies
10
Views
2K
oharag11
oharag11

Part and Inventory Search

Sponsor

Back
Top