Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

defining crosshead speed

Status
Not open for further replies.
zerrouki

zerrouki

Mechanical
Joined
Oct 8, 2015
Messages
7
Location
DZ
hi everyone, I want to ask how we can define the crosshead speed in the case of simulation of tensile test (under à constant crosshead speed).
thanks

 
Sort by date Sort by votes
I'm not sure about that but firstly I would define the suface where i supose it is running to an expecific speed and after that i would define the speed (Load > Boundary condition manager > create > displazament/rotation )

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Kamyar_K
  • Locked
  • Question Question
Defining multiple interaction in abaquss
Replies
1
Views
1K
FEA way
FEA way
shashank306
  • Locked
  • Question Question
Ratio of deformation speed to wave speed error
Replies
1
Views
526
FEA way
FEA way
S Balakumaran
  • Locked
  • Question Question
The ratio of deformation speed to wave speed exceeds 1.0000 in at least one element error in ABAQUS
Replies
2
Views
2K
PeteTranc
PeteTranc
Tinni1
  • Locked
  • Question Question
Error in Anbaqus: Linear buckling analysis, defining contact interaction and boundary condition.
Replies
4
Views
392
Tinni1
Tinni1
SofiaB
  • Locked
  • Question Question
Defining a Riks, static step
Replies
4
Views
675
SofiaB
SofiaB

Part and Inventory Search

Sponsor

Back
Top