Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dear Fellows, I need to weld a flan
- Thread starter ALA445
- Start date
Dhurjati Sen
Materials
No. But it could be a client requirement that supersedes Div I.
DHURJATI SEN
DHURJATI SEN
goutam_freelance
Mechanical
Category should be C.
Since you have not indicated any lethal service requirement the answer should be 'PWHT not required' as the thickness is less than 13 mm.
Engineers, think what we have done to the environment !
Since you have not indicated any lethal service requirement the answer should be 'PWHT not required' as the thickness is less than 13 mm.
Engineers, think what we have done to the environment !
- Status
Similar threads