Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dear Experts, I Would like to
- Thread starter CREERAAM
- Start date
racookpe1978
Nuclear
Explain your question. It does not make sense to me, unfortunately.
ornerynorsk
Industrial
You wouldn't be speaking of MELT flow, by an chance?
It is better to have enough ideas for some of them to be wrong, than to be always right by having no ideas at all.
It is better to have enough ideas for some of them to be wrong, than to be always right by having no ideas at all.
- Thread starter
- #4
Dear Mr. racookpe1978,
Dear Mr.ornerynorsk,
Your Right am questioned about the MELT FLOW RATE TEST.
Am Here discussed about the MELT FLOW RATE test of HDPE materials(BOROUGE PE 100)with my Production manager When i asked him about the MFR test, He was answered that MFR Test is related to how much of Parameters on the Extrusion Machine to set Like Extrusion Pressure and Heat input(melting Temperature) Etc., can we have to set on the Machine. By testing the MFR for particular batch of raw materials we know the Input parameters for machines results
My Question is
What ever we getting the TEST result on MFR test.
1. But the MELTING TEMPERATURE of Borouge PE100 is constant 190 deg c. Then why we need to test the MFR?
2. The extrusion speed we input on Machine for particular pipe size. To attain the required production is our decision with quality requirements Then why we need to test the MFR?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
Dear Mr.ornerynorsk,
Your Right am questioned about the MELT FLOW RATE TEST.
Am Here discussed about the MELT FLOW RATE test of HDPE materials(BOROUGE PE 100)with my Production manager When i asked him about the MFR test, He was answered that MFR Test is related to how much of Parameters on the Extrusion Machine to set Like Extrusion Pressure and Heat input(melting Temperature) Etc., can we have to set on the Machine. By testing the MFR for particular batch of raw materials we know the Input parameters for machines results
My Question is
What ever we getting the TEST result on MFR test.
1. But the MELTING TEMPERATURE of Borouge PE100 is constant 190 deg c. Then why we need to test the MFR?
2. The extrusion speed we input on Machine for particular pipe size. To attain the required production is our decision with quality requirements Then why we need to test the MFR?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
It's part of the process control. You should do some research; I took me less than a minute:
TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529
TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
