Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dear engineers, I am creating a

Status
Not open for further replies.

sneves

Petroleum
Joined
Jun 27, 2013
Messages
5
Location
NL
Dear engineers,

I am creating a comparisson between load testing requirement for mechanical handling equipment listed in different standards. The idea is to choose the best standard and incorporate it in our company specifications.

I am now analysing the British Standards. I found BS 2853 for design and testing of runway beams however I couldn't find anything similar for pad eyes.

Does any body know where can I find a British Standard for design and testing of pad eyes?

Thanks in advance for your comments.

Best regards,
Neves

 
Hi,
You can check BS EN 12079-1:2006
Offshore containers and associated lifting sets —
Part 1: Offshore containers — Design, manufacture and marking

Follow this link: see section: 5.4.7 Pad eyes


Also, BS EN 12079-3:2006
Offshore containers and associated lifting sets —
Part 3: Periodic inspection, examination and testing
 
Dear RobyengIT,

Thanks for your response.

I was searching specifically in the BS standards. Anyway thanks again for your help.

Regards,
Neves
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top