Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DEAD LOAD IN AUTODYN----PLEASE HEEEEELP ME

Status
Not open for further replies.
solatiebrahim

solatiebrahim

Civil/Environmental
Joined
Dec 24, 2014
Messages
1
Location
IR
Hi all

PLEASE HELP ME
i'm trying to model a RC beam-column subassemblage under blast loading by a combination of dead weight loading.this structure has two beams with one column(middle column). in this model middle column is under dead load and blast load. I WANT TO KNOW How do I apply dead load to the face of the MIDDLE column with AUTODYN????

 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
shiraz883
  • Locked
  • Question Question
Stresses increase on adding thermal boundary conditions/ thermal load
Replies
1
Views
510
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top