Mar 14, 2013 #1 Alvinz Geotechnical Joined Mar 14, 2013 Messages 2 Location AU A task was given to use DCP Australia (9kg, 30 degrees, blows for every 100mm ) to test for bearing capacity. The test is carried out for crane pad purposes. The question is how to workout the bearing capacity based on the dcp results? Thank you.
A task was given to use DCP Australia (9kg, 30 degrees, blows for every 100mm ) to test for bearing capacity. The test is carried out for crane pad purposes. The question is how to workout the bearing capacity based on the dcp results? Thank you.
Mar 16, 2013 #2 BigH Geotechnical Joined Dec 1, 2002 Messages 6,012 Location TJ Don't post in more than one forum . . . it is discouraged (big time). Upvote 0 Downvote