Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Datum elements color change

Status
Not open for further replies.

Vertx

Automotive
Joined
Jan 16, 2012
Messages
10
Location
CA
Hi,

I want the datum elements (isolated elements) to appear in a different color than the elements with history, but I want this to be configured, not a properties change inside each part.

Is there a way to configure this?

Thank you
 
Hi, once i tried to control color with rules, and i did it. LIke you have parameter with colors and you can change it, it was controled with a rule.
Or you can go with a macro, you have that option too.

like to make some palete, and to have multiple selection, then check for parent if there not, change color, or smthg like that.

I hope i helped
 
I honestly don't know how to create that rule... all the tutorials always relate to the parameters.
 
I'd want that to be some sort of configuration... any thoughts?
 
catiavbmacro, would you be able to provide the rule syntax?

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top