Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

datum changed

  • Thread starter Thread starter francis
  • Start date Start date
Status
Not open for further replies.
F

francis

Guest
hi every body,



I am facing typical problem. I have mentioned a datum axis to model with A but in between it has changed automaticaally to its original axis name (i.e., A to A_5 datum)

if I have tried to rename it It is giving message A datum already exist which is not seen in the model.

Is it a bug?? .... How can I modify this to name A again (I dont want other name) . Can any body help me.

Thanks.
 
Hello



do you use this function properly ?

I use this every time and works right.

Setup > Name > pick the desired feature or plane and enter the new name.



It is interesting matter. If it is possible, email me the file so I can see it myself

karavasilisx@yahoo.com



regards

xcad
 
Check there's not already a suppressed feature named A - could be a datum plane or axis.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top