Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Date code serial number G code or macro for Milling or CNC

Status
Not open for further replies.
Berndog12

Berndog12

Mechanical
Joined
Oct 29, 2007
Messages
25
Location
US
Does anyone out there have any G code or a macro for date code serial numbers? We use date code then 3 digits after it starting at "-001". This would save us from writing an individual program for every part to serialize. Thanks.

B.

Bernie
SolidWorks 2008 SP3.0
 
Status
Not open for further replies.

Similar threads

dgeesaman
  • Locked
  • Question Question
Hard milling for tooling
Replies
3
Views
2K
cnc king
cnc king
AbdullahE
  • Locked
  • Question Question
Cnc code
Replies
1
Views
385
enginesrus
enginesrus
drawoh
  • Locked
  • Question Question
CNC Programming Left Hand Right Hand
Replies
4
Views
670
3DDave
3DDave
V
  • Question Question
Designing a Checking Jig for Sheet Metal Hole Positions After Bending
Replies
1
Views
10K
Burunduk
Burunduk
Radius1
  • Locked
  • Question Question
CNC Op 10 and Op 20
Replies
2
Views
2K
enginesrus
enginesrus

Part and Inventory Search

Sponsor

Back
Top