I'm having a strange problem in Solidworks. I used to use solidworks 2006 before and never had this issue. Many of the edge lines for objects appear as dashed lines. They look just like construction lines but they aren't. If I turn on view temporary axes, all lines turn dashed. The strange thing is that it only does it some of the time. It happens in both 3d models and 2d drawings. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dashed lines
- Thread starter popeiler
- Start date
CorBlimeyLimey
Mechanical
Which SW version, video card and driver are you using?
Intermittent graphics problems are almost always caused by a video card/driver mismatch with the SW version, or a faulty install of the driver or a faulty card.
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
Intermittent graphics problems are almost always caused by a video card/driver mismatch with the SW version, or a faulty install of the driver or a faulty card.
- Thread starter
- #3
- Status
