Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dashed/Dotted lines in a drawing

Status
Not open for further replies.

jackosieves

Petroleum
Feb 5, 2010
24
I just want to do a quick drawing using the drawing feature in SolidWorks. No need to build parts yet. I was just wondering if it is possible to change some of the lines to dashed or dotted lines? Any info on how to do this would be greatly appreciated. Thanks.
 
Replies continue below

Recommended for you

Enable your Line Format toolbar and/or check the "For Construction" box after you highlight a sketch segment.

"Art without engineering is dreaming; Engineering without art is calculating."

Have you read faq731-376 to make the best use of these Forums?
 
You can also try layers. Set new layers, assign style and thickness. Apply as you go.


~ BT
 
Awesome, Thanks a bunch for the help guys. This forum rules.
 
try, play around with the dim style, change font/color


~ BT
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor