Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Damage Curves

Status
Not open for further replies.

IASMike

Electrical
Joined
Mar 22, 2005
Messages
25
Location
US
Can anyone tell me where I can find the electrical cable damage curves ?
 
If you have a software like SKM or ESDA for short circuit and coordination study, it should contain damage curves almost all common cable type and sizes.

Failing that contact one or two good cable manufactures and they should be able to provide you the same. Also try visiting websites.

I do not know, but some publications may have damage curves for generic (most common) cables.
 
We use etap but it is missing some of the damage curves. I know one of the IEEE standards has generic damage curves in it but I do not remember which one.
 
Try okonite.com
Look under engineering technical data and then short circuit currents adn then conductor data.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top