Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cylindrical Grinding of Aluminum

Status
Not open for further replies.
Boristhespider

Boristhespider

Aerospace
Joined
Oct 3, 2002
Messages
2
Location
CA
Hi

I would like some insight on cylindrical grinding of aluminum. I have done some research and Silicon carbide seems to be the wheel of choice, as well as Aluminum oxide. We require a 4um finish on a .187 diameter part. Any words of wisdom would be welcome.

Thanks in advance
Boris
 
Status
Not open for further replies.

Similar threads

durablack2
  • Question Question
What process / method to make this aluminum edge?
Replies
1
Views
6K
Brian Malone
Brian Malone
RanaAq
  • Locked
  • Question Question
Centreless grinding of end flat shaft
Replies
0
Views
265
RanaAq
RanaAq
Lifehouse0816
  • Locked
Breakout Period for Preservation of Static Equipment at Site
Replies
1
Views
2K
IRstuff
IRstuff
Ramadan Ahmed
  • Locked
  • Question Question
Width of an O-Ring Groove to an Edge
Replies
13
Views
2K
mfgenggear
mfgenggear
RnD bird
  • Locked
  • Question Question
Stripping of housing ports solution
Replies
1
Views
359
desertfox
desertfox

Part and Inventory Search

Sponsor

Back
Top