thermeng2
Mechanical
- Jan 29, 2003
- 24
Hi,
I have been asked to cut mild steel with nitrogen. I have never done this but have heard of it being done to get rid of the scale that is left on the cut edge from oxygen. I am using a 1500 watt mazak. If any one has cut conditions for doing this or pointers on were to start from that would be great.
Thanks
I have been asked to cut mild steel with nitrogen. I have never done this but have heard of it being done to get rid of the scale that is left on the cut edge from oxygen. I am using a 1500 watt mazak. If any one has cut conditions for doing this or pointers on were to start from that would be great.
Thanks